Products from taskit GmbH
No results were found for the filter!
IO Nuts RS485
IO Nuts with RS485 connection. With the RJ12 jacks, the IO Nuts can be directly connected to our GPIO systems and enable a perfect sensor system. Have a look at our GPIO Base Boards here : Base-GPIO Boards
€40.46 *
IO Nuts TCS3400
The TCS3400 enables the detection of color and IR ambient light. Thus the lux and color temperature can be measured and the color can be detected. With the RJ12 sockets the IO Nuts can be connected directly to our GPIO systems and enable...
€40.46 *
IO Nuts TSL2591
Digital Light Sensor (TSL2591) The TSL2591 is a digital light sensor that provides accurate lux calculations. The sensor contains infrared and full spectrum diodes, allowing both infrared, full spectrum and human visible light to be...
€40.46 *
IO Nuts TMAG5273
Linear 3D effect sensor (MAG5273) The MAG5273 sensor is a linear 3D effect sensor with low power consumption. The sensor has an integrated temperature sensor, which allows, for example, the temperature compensation for a magnetic field...
€40.46 *
IO Nuts TMP75
Temperature sensor (TMP75) The TMP75 sensor is a serial two-wire temperature sensor and can measure temperatures with a resolution of 0.0625 degrees Celsius. With the RJ12 sockets the IO Nuts can be connected directly to our GPIO systems...
€40.46 *
IO Nuts VL53L0X
Light travel time sensor (VL53L0X) The VL53L0X sensor generates bundled light with a wavelength of 940mm that is not visible to humans and is reflected back to the sensor by an obstacle. The sensor measures the time it takes for the...
€40.46 *
GPIO Base21
The GPIO Base21 is a USB multiplexer on six interfaces. Our IO Nuts can be connected to the six Rj12 sockets. Beside e.g. pressure-, humidity-, or temperature measurement, further measurement variables are available. For an individual...
€117.81 *
Set Artikel
GPIO Base21
The GPIO Base21 is a USB multiplexer on six interfaces. Create your individual GPIO system in this configurator. Technical Details about the Sensor-/ actuator nuts IO Nut AS6212 Temperature sensor Accuracy : +/- 0,2°C -10°C – 65°C IO Nut...
From €117.81 *
Base GPIO module - 2 channel analog output with...
The gpio Base module provides 2 analog outputs that can be used as current and voltage interface. The interface converter module is plugged onto the baseboard, can be quickly integrated into existing IoT systems and can be easily...
€97.71 *
Base GPIO-module – 2 Relais and socket...
The gpio Base module offers two switchable relays. Up to 230 volts can be switched. The interface converter module is plugged onto the baseboard, can be quickly integrated into existing IoT systems and can be easily configured. The...
€45.22 *
Base GPIO module - 4 Digital Input 24 Volt and...
The gpio Base module offers four digital inputs, which are connected with an optocoupler. It offers numerous functions for the acquisition and processing of digital signals up to 24Volt. It has four isolated (isolation between the...
€45.22 *
Base GPIO module - 4 digital input and socket...
The gpio module offers you numerous functions for the acquisition and processing of digital signals. It has four digital inputs and outputs for switching your signals, with all channels connected separately with optocouplers. The...
€1.19 *
Viewed